¿Qué elementos se prueban como parte de una calibración ISO 21501?

Como parte de la calibración ISO 21501, se prueban los siguientes elementos:

Eficiencia del recuento
Resolución de tamaño
Calibración de tamaño
Tasa de recuento falso
Límite de concentración
Caudal de muestreo
Tiempo de muestreo
Volumen de muestreo

Mantente actualizado con nuestros boletines informativos.

Recibe actualizaciones oportunas sobre tus temas favoritos de parte de los expertos de Beckman Coulter Life Sciences. Ingresa tu correo electrónico.

© 2000-2025 Beckman Coulter, Inc. All rights reserved. Beckman Coulter, the stylized logo, and the Beckman Coulter product and service marks mentioned herein are trademarks or registered trademarks of Beckman Coulter, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES. PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS The listed regulatory status for products correspond to one of the below: IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use." ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established." CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC) RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures." LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only." No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.